UPVC Door Lock Replacement
UPVC doors are a fantastic protection against burglaries. They do have their limitations, which can be overcome with the installation of a deadlock.
It's time to replace the barrel lock if you feel that your uPVC door lock feels loose. This simple DIY project will enhance the security of your home and enhance its appearance.
The old lock cylinder must be removed.
You could have a damaged lock-cylinder if you notice that your front door feels fragile or the lock is struggling to turn. Replacing it will ensure that it operates smoothly and improve security. The procedure is fairly easy and should take about 30 minutes. You'll need an electric screwdriver. To start by opening your door, take a look at the edge of the lock the cylinder. There should be an unintentional screw that is roughly in line with the bottom of the cylinder. Remove it with an screwdriver, and then keep it in a safe place.
You will have to know the exact dimensions of your existing cylinder to locate a suitable replacement. Typically, the sizes range from 60mm to 110mm. To determine the size, you'll need to locate the screw on the faceplate of the lock and then remove it. You may also try to turn the lock handle using the key while the cylinder remains in place to see how much it changes in each position.
Next, you'll need to determine the cylinder's diameter and length of the cylinder cam. These measurements will ensure that the new lock is compatible with the door that you already have. Depending on the type of uPVC door, these measurements may differ. You'll need to choose one that is similar or slightly bigger than the cylinder that is currently in use.
Once you have your measurements, it is time to take down the old door cylinder. It's a fairly simple task, but it's important to do it right to avoid damaging the frame or door. Make sure that the door is properly propped up or secured so that it won't shut between steps.
A professional locksmith can be a good choice if you aren't feeling like doing it yourself. They can offer expert guidance, flawless execution and peace-of-mind. They can also assist you to choose a safe and secure locking system. DIY is a great option to save money as well as learn new techniques. You only need a little patience and the right tools like a Phillips Screwdriver. It's not as difficult as you think to change your uPVC locks.
Installing the new lock cylinder
When you are changing the locks on your front door, it is essential to use the correct measurements and follow the proper steps to ensure that the new one goes in correctly. This will not only allow you to avoid future problems but it will keep your home safe and allow you to use a key on both sides of the door. You should measure the uPVC lock's overall length, backset and cylinder size before replacing it. These measurements will ensure that the lock cylinder can fit inside the uPVC and operate effectively without gaps.
The first step is to remove the handle from the door by loosening it with an screwdriver. The next step is to take off the barrel screw that holds the lock of the cylinder. After that, you can remove the old lock cylinder by inserting a key in the cylinder and turning it to the left and the right. It is possible to remove the cylinder if the key is in one of these positions.
Installing the new cylinder inside the front door is easy and will involve the same steps that you followed to remove the old one. However, you must be aware that the new cylinder won't fit into the space where the previous one was. This is due to the fact that the cylinder has to be properly aligned to allow it to be locked and closed with keys. To achieve this, ensure that the cylinder has an open keyway that is circular and located in its slot.
Installing a new uPVC lock in your front door isn't difficult, but you should be careful not to harm the handles or door frames. If you are uncertain about your abilities to complete this project, hire a professional who is Checkatrade approved and has experience working with these kinds of doors. Locksmiths can save you time and money by completing the work quickly.
Attaching the door handle
You might want to alter your lock on your front entrance for a variety of reasons. You may have lost a key, or your previous tenant hasn't returned the keys, or you'd like to upgrade to more secure locks. It takes only five minutes to replace the barrel on a lock of a uPVC front door. You'll need a Phillips head screwdriver, the new cylinder for the lock, and a spare key (if you plan to make use of one). Make sure that the door is propped up or secured so that it won't close during the process.
There are a few snags to changing the uPVC front door lock mechanism, but they are not as difficult to fix as you may think. It's important to start by determining the type of lock you have installed on your front door and what size you need for the replacement. Most modern uPVC doors have single euro-cylinder locks, but there are also multipoint locks and strip locks available for older doors. It is easier to replace your uPVC door lock if you know what brand and model it is.
After replacing the cylinder you must reconnect the handle. To begin, you'll have to loosen a set screw on the spindle shaft of the handle with the help of a screwdriver. Then, you can remove the handle to reveal the spindle shaft. If the shaft is threaded, you'll need to loosen it a bit and back it up with a screwdriver to ensure a proper fit.
Test the lock after having tightened the screws and lock cylinder. Check that the key turns easily and fits well and that the locking mechanism of the handle is working well. A locksmith can assist you if you're uncomfortable making it your own.
It is also important to remember that uPVC door handles and lock mechanisms require regular lubrication to ensure their function. This is particularly applicable in areas that experience high wear and tear like those that are frequently used or closed and locked. A small amount of lubricant will go a long way towards prolonging their life and ensuring they function properly.
Testing the new lock
A door lock made of upvc is an essential element of your home's security. Like all other devices it is possible for a uPVC lock to be damaged or worn out in time. The key to a functional uPVC lock is regular maintenance. This will stop problems from happening and could compromise your home's security. The best method to accomplish this is to grease the internal mechanisms with an approved lubricant every six months. This will ensure that the lock is working smoothly and prevent it from rusting or getting damaged.
In addition to the normal lubrication, you can also apply a silicon-based spray to loosen the keyway and make it easier to insert the key. This is a straightforward DIY fix that can save you money in the long in the long. Be sure to not apply WD-40 as it can leave a residue of oil behind that could potentially damage the lock.
After installing the new cylinder, it's crucial to test it before you decide if it functions correctly. You can do this by testing the handle from the inside and outside of the door. It is now time to put the handles back into place and then re-insert the spindle screws to ensure everything is in place. Re-insert all the screws that secured the handles. Give yourself a pat on your back for a good job!

A locksmith can add additional features to enhance the security of your home, for example door chains or sash jammers. They can help you select the best locks for your house. A professional can also assist you in determining the ideal size of cylinder for your doors, which is crucial because a wrong lock can compromise your security.
The cost of replacing the lock of a uPVC lock varies based on the type of lock used and the number of doors that will need to be replaced. The cost of a professional locksmith ranges between PS75 and PS100 per hour. However, the price may vary depending on where you live and what type of lock you need. Compare website before choosing a company.